PC200 boom cylinder assy 205-63-55101 205-63-55800 LH Arm bucket cylinder 205-63-75101 205-63-65101 repair seal kit 707-99-57160

D:52 mm; E:46.5 mm; Static (Coa):25.6 kN; Pu:3.120 kN; rs (min):1 mm; d2 (max):34.9 mm; d2:25 mm; F:32 mm; b:3 mm; B:15 mm;

M1:5 mm; M2:21 mm; Spring washer in accordance with DIN 128:A 8; Mass locking clip:0.046 kg; B:24 mm; M:15 mm; M3:9 mm; Hexagonal head bolt:M 8x16;

N1:15.875 mm; L:209.55 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; P60°:32.5 kN; R2:15.875 mm; PG:1/8 NPT; J max.:177.8 mm; RG:1/8 NPT; db:49.2 mm;

D:52 mm; E:46.5 mm; Static (Coa):25.6 kN; Pu:3.120 kN; rs (min):1 mm; d2 (max):34.9 mm; d2:25 mm; F:32 mm; b:3 mm; B:15 mm;

Lock nut:KMFE 24; G:M 120x2; d1:106.362 mm; B1:112 mm; d:120 mm; d3:155 mm; Mass adapter sleeve assembly:3.7 kg; B:26 mm; Hydraulic nut:HMV 24 E;

Fillet Radius ra:2.50 mm; D:180.0000 mm; Grease Speed Rating Open/Shielded n1:3100 rpm; B:41.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Basic Static Radial Load Rating Co:146000 N; Accessories:Two Shields; d:85.000 mm;

N1:15.875 mm; L:209.55 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; P60°:32.5 kN; R2:15.875 mm; PG:1/8 NPT; J max.:177.8 mm; RG:1/8 NPT; db:49.2 mm;

rc max.:1 mm; Basic dynamic load rating C:1057 kN; Calculation factor e:0.35; Da max.:202 mm; r3,4 min.:3 mm; 2B:146 mm; K:12 mm; Ca min.:8 mm; d:100 mm; b:18 mm;

B1:110.185 mm; Threads per inch:12; Sleeve:S 122x3.13/16; B:20.091 mm; B4:23.012 mm; Mass adapter sleeve assembly:2.95 kg; G:109.855 mm; d3 max.:145.39 mm; Lock nut:AN 22; d:110 mm;

d:100.000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:2600 rpm; Sealed Speed Rating n3:1800 rpm; B:82.60 mm; D:215.0000 mm; Basic Dynamic Radial Load Rating C:255000 N; Accessories:One Seal; Basic Static Radial Load Rating Co:255000 N;

N1:15.875 mm; L:209.55 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; P60°:32.5 kN; R2:15.875 mm; PG:1/8 NPT; J max.:177.8 mm; RG:1/8 NPT; db:49.2 mm;

D:52 mm; E:46.5 mm; Static (Coa):25.6 kN; Pu:3.120 kN; rs (min):1 mm; d2 (max):34.9 mm; d2:25 mm; F:32 mm; b:3 mm; B:15 mm;

dk:60 mm; d2 max.:104 mm; G:M 42x3; α:7 °; Mass rod end:2.45 kg; l2 max.:217 mm; C1 max.:28 mm; Specific dynamic load factor K:150 N/mm²; B:32 mm; Basic dynamic load rating C:190 kN;

M1:5 mm; M2:21 mm; Spring washer in accordance with DIN 128:A 8; Mass locking clip:0.046 kg; B:24 mm; M:15 mm; M3:9 mm; Hexagonal head bolt:M 8x16;

B1:110.185 mm; Threads per inch:12; Sleeve:S 122x3.13/16; B:20.091 mm; B4:23.012 mm; Mass adapter sleeve assembly:2.95 kg; G:109.855 mm; d3 max.:145.39 mm; Lock nut:AN 22; d:110 mm;