Bearing NUP2313-E-TVP2 FAG

G:M 170x3; Lock nut:KML 34; B4:28.5 mm; Hydraulic nut:HMV 34 E; d3:200 mm; B:26 mm; B1:101 mm; d:170 mm; Locking device:MBL 34; d1:150.813 mm;

D:440 mm; B:120 mm; with tapered bore:890 min-1; Pu:1660 kN; with cylindrical bore:750 min-1; Static (Cor):22.3 mm; d:240 mm; rs (min):4 mm; Dynamic (Cr):12 mm; Grease:2560 kN;

ba:61.119 mm; P60°:301 kN; Mass pillow block:92.5 kg; J1:85.725 mm; Housing:SAFS 528; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 28x5; P90°:180 kN; H2:60.325 mm; Max. speed for PosiTrac Plus seal:1150 r/min;

Specific dynamic load factor K:100 N/mm²; l3 min.:46 mm; N max.:82 mm; Size bolt with internal hexagon:M 10; G:M 33x2; l4 max.:146.5 mm; Basic static load rating C0:176 kN; α:4 °; Tightening torque bolt with internal hexagon:46 N·m; Material constant KM:330;

N1:22.225 mm; Stabilizing ring:2 x SR-1520; h:42.069 mm; P180°:48.9 kN; P60°:119 kN; Mass pillow block:26.8 kg; End plug (suffix Y):EPR 15; Lock washer:W 20; Ca:55.804 mm; Bearing:1220;

d1 ≈:296.8 mm; Basic dynamic load rating C:698 kN; D:342.9 mm; a:59.47 mm; rb max.:3.3 mm; Calculation factor e:0.35; B:57.15 mm; r1,2 min.:6.4 mm; Limiting speed:1600 r/min; da max.:273 mm;

da min.:897 mm; Calculation factor kr:0.36; Reference speed:300 r/min; Da max.:1334 mm; D1 ≈:1213 mm; d:850 mm; ra max.:5 mm; b:22.3 mm; B:500 mm; Fatigue load limit Pu:2900 kN;

da min.:897 mm; Calculation factor kr:0.36; Reference speed:300 r/min; Da max.:1334 mm; D1 ≈:1213 mm; d:850 mm; ra max.:5 mm; b:22.3 mm; B:500 mm; Fatigue load limit Pu:2900 kN;

T:17.25 mm; r2s (min):0.3 mm; Dynamic (Ca):39.3 kN; d2:30 mm; r1s (min):1 mm; C:14 mm; rs (min):1 mm; Static (Coa):42.8 kN; B:16 mm; Pu:5.220 kN;

D:440 mm; B:120 mm; with tapered bore:890 min-1; Pu:1660 kN; with cylindrical bore:750 min-1; Static (Cor):22.3 mm; d:240 mm; rs (min):4 mm; Dynamic (Cr):12 mm; Grease:2560 kN;

Attachment bolt diameter G:15.875 mm; A:63.5 mm; H:114.3 mm; S:0.794 mm; Mass bearing unit:4.76 kg; L:225.425 mm; Limiting speed:4100 r/min; da:49.212 mm; H1:57.15 mm; s:25.4 mm;

Fillet Radius rb:1.50 mm; Grease Speed Rating n1:960 rpm; Fillet Radius ra:4.00 mm; B:170.00 mm; D:540.0000 mm; Oil Speed Rating n2:1300 rpm; Basic Dynamic Radial Load Rating C:1010000 N; d:300.000 mm; Basic Static Radial Load Rating Co:2200000 N;